Vaporeon Amigurumi Pattern


A few notes before we begin



-While creating this amigurumi you will work in continuous rounds, unless told otherwise.

-When I am creating an amigurumi based on a certain character I like to look at reference pictures of the character I am creating. It really helps when assembling the pieces and making the facial features!

-Your finished amigurumi should measure about 9 inches tall, depending on yarn type and tension.


ª  I did not create this character. Vaporeon is copyright of GameFreak. This pattern is not affiliated with, endorsed by, or sponsored by Gamefreak. This pattern is not branded as anything affiliated with said franchise.
ª  You may not claim this pattern as your own. You may not reprint or sell this pattern.
ª  If you use this pattern I ask that you please give me credit as the original designer and link the pattern back to me.
ª  Feel free to make changes or adapt this pattern as you see fit. After all, this is YOUR creation! But please, as stated above, give me credit for the original design.


Materials Needed


o G Hook (4.0mm crochet hook)
o Aqua Blue colored yarn (I used Red Heart Super Saver in Turqua)
o White Yarn
o Dark Blue/ Navy Yarn
o Light Yellow Yarn
o Black craft felt
o White craft felt
o Hot glue/ tacky glue. (Optional: instead of glue you can use a felting needle)
o Fiber Fil stuffing
o Scissors
o Yarn Needle for sewing


Abbreviations

SC = Single Crochet
INC = Increase (2 SC in one)
HDC= Half double crochet
DC = Double crochet
DEC = invisible decrease
Sl St = Slip Stitch
F/O = Finish off.


Body

Use Aqua blue/Turqua. 

Round 1)            6 SC in MR (6)
Round 2)            INC around (12)
Round 3)            1 SC, INC; repeat around (18)
Round 4)            2 SC, INC; repeat around (24)
Round 5)            3 SC, INC; repeat around (30)
Round 6)            4 SC, INC; repeat around (36)
Round 7)            SC around (36)
Round 8)            - Thru Round 10) SC around (36)
Round 11)          10 SC, DEC; repeat around (33)
Round 12)          SC around (33)
Round 13)          SC around (33)
Round 14)          9 SC, DEC; repeat around (30)
Round 15)          SC around (30)
Round 16)          SC around (30)
Round 17)          8 SC, DEC; repeat around (27)
Round 18)          SC around (27)
Round 19)          SC around (27)
Round 20)          7 SC, DEC; repeat around (24)
Round 21)          SC (24)
Round 22)          6 SC, DEC; repeat around (21)
Round 23)          SC around (21)
Round 24)          5 SC, DEC; repeat around (18)
Round 25)          SC around (18)

Now we will crochet in rows to slightly increase the height of one side of the body. This side of increased height will be the backside of the body.

Round 26)          SC 7, sl st, turn
Round 27)          SC 6, sl st

Do not finish off. Color change to white then proceed to crochet the white collar into the front loops.

White Collar


*At top of the body around the neck, SC into the front loops

Round 1)  2 SC, INC; repeat around (24)
Round 2)  3 SC, INC; repeat around (30)
Round 3)  4 SC, INC; repeat around (36)
Round 4)  5 SC, INC; repeat around (42)
Round 5)  6 SC, INC; repeat around (48)
Round 6)  7 SC, INC; repeat around (52)
Round 7)  SC, chain 3, *SC 1, HDC*into chain, SC into 3rd st from chain, SC, SL ST
            Repeat around. 
Finish off.
Stuff the body. You should end up with something that looks like this...

Front Legs

Use Aqua Blue/Turqua. Make two.

Round 1) 6 SC in MR (6)
Round 2) INC around (12)
Round 3) – Round 13) SC around (12)

Now we will crochet in rows to increase the height of one side of the leg. This side will be the front side of the front leg.

Round 13) Sl st, 6 sc, Sl st turn
Round 14) 5 Sc, Sl st turn
Round 15) 4 Sc, Sl st.

Finish off. Leave open and stuff.


Haunch

Use Aqua Blue/Turqua. Make two.

Round 1) 6 SC in MR
Round 2) INC around (12)
Round 3) 1 SC, INC; repeat around (18)
Round 4) 2 SC, INC; repeat around (24)
Round 5) 3 SC, INC; repeat around (30)
Round 6) SC around (30)
Round 7) DEC x 6, then SC to end of row (24)

Finish off. Leave open and stuff.


Rear Foot

Use Aqua Blue/Turqua. Make two.


Round 1) 6 SC in MR (6)
Round 2) INC around (12)
Round 3) – Round 5) SC around (12)
Round 6) 1 SC, DEC; repeat around (8)
Round 7) SC around (8)
Round 8) SC around (8)
Round 9) SC around (8)

Lightly stuff then SC along the top to close off.


Head

Use Aqua Blue/Turqua.


Round 1) 6 SC in MR (6)
Round 2) INC around (12)
Round 3) SC around (12)
Round 4) 1 SC, INC; repeat around (18)
Round 5) SC (18)
Round 6) INC x 6, SC 12 (24)
Round 7) [1 SC, INC] x 6, SC 12 (30)
Round 8) SC around (30)
Round 9) 4 SC, INC; repeat around (36)
Round 10) SC around (36)
Round 11) SC around (36)
Round 12) 4 SC, DEC; repeat around (30)
Round 13) SC around (30)
Round 14) SC around (30)
Round 15) SC around (30)
Round 16) 3 SC, DEC; repeat around (24)
Round 17) 2 SC, DEC; repeat around (18)
Round 18) 1 SC, DEC; repeat around (12)
Round 19) DEC around (6)

Stuff the head and close off.

Head Cap

Use Dark Blue/ Navy.

For this piece, we will be crocheting in ROWS, not rounds! 
Chain 2. At the end of each row, chain 1 then turn

Row 1) SC 1 (1)
Row 2) INC (2)
Row 3) INC, SC (3)
Row 4) SC, INC, SC (4)
Row 5) SC, INC, INC, SC (6)

Chain 7 Then turn

Row 6) SC 12 across

Chain 7 then turn

Row 7) 18 SC 
Row 8) 18 SC
Row 9) SC, DEC; repeat to end of row (12)
Row 10) SC across (12)
Row 11) DEC; repeat to end of row (6)
Row 12) SC across (6)
Row 13) DEC x 3 (3)

Head Fins

Use Dark Blue/ Navy. Make 3.


Round 1) 3 SC in Magic Ring (3)
Round 2) 2 SC, INC (4)
Round 3) SC around (4)
Round 4) 1 SC, INC; repeat around (6)
Round 5) – Round 8) SC around (6)
Round 9) 2 SC, INC; repeat around (8)
Round 10) SC around (8)
Round 11) SC around (8)
Round 12) HDC, 3 DC in the next stitch, HDC, SC, SL ST. Finish off.

Leave open. Do not stuff. Fold flat.


Head Fin Webbings

Use light yellow. Make 3.

For this piece, we will be working in rows. At the end of each row chain 1 then turn.

Chain 12.


Row 1) Sl St, 4 SC, DEC, 4 Sl St (10)
Row 2) 6 Sl St, SC, SC, chain 2 (10)
Row 3) Sl st, HDC, SC, SC, 5 Sl St (9)
Row 4) 4 Sl St, SC, SC (6)
Row 5) 6 Sl St (6)



Tail

Use Aqua blue/Turqua


Row 1) 6 SC in Magic Ring. (6)
Row 2) SC around (6)
Row 3) 1 SC, INC; repeat around (9)
Row 4) SC around (9)
Row 5) SC around (9)
Row 6) 2 SC INC; repeat around (12)
Row 7) SC around (12)
Row 8) SC around (12)
Row 9) 3 SC, INC; repeat around (15)
Row 10) SC around (15)
Row 11) 4 SC, INC; repeat around (18)
Row 12) 6 HDC, 12 SC (18)

Row 13) – Row 25) repeat instruction for row 12 until row 25.

Row 26) 6 INC, 12 SC (24)
Row 27) 16 HDC, 1SC, chain 1, turn your work.

*now we are going to be working in rows, not rounds*

Row 28) SC, 15 HDC, SC, chain 1, turn (17)
Row 29) SC, 15 HDC, chain 1, turn (16)
Row 30) 15 HDC, SC, chain 1, turn (16)
Row 31) [DEC, SC 1] rep. 5 times, 11 SC, chain1, turn (11)
Row 32) [DEC, SC 1] rep. 3 times, DEC, chain 1, turn (7)
Row 33) 3 DEC, sl st. (4)

Finish off. Stuff the tail.


Tail Fins

Use Aqua blue/Turqua. Make two.


Row 1) 4 SC in magic ring (4)
Row 2) 1 SC, INC; repeat around (6)
Row 3) SC (6)
Row 4) 1 SC, INC; repeat around (9)
Row 5) 2 SC, INC; repeat around (12)
Row 6) SC around (12)
Row 7) 3 SC, INC; repeat around (15)
Row 8) 4 SC, INC; repeat around (18)
Row 9) 1 SC, DEC; repeat around (12)
Row 10) DEC around (6)

Finish off. Do not close off or stuff. Fold flat and leave open.


Back Fin

Use dark blue/navy.

Chain 51

Row 1) SC, 3 DC in the next stitch, SC, SL ST. Repeat 11 times. SC, 2 HDC in next stitch, SC, finish off.

Assembly



Now that we have all of Vaporeon’s parts made, let’s begin putting it together!

1. First, sew the head onto the body. Keep in mind, the higher side with extra rows is Vaporeon’s back side.




2. Sew The haunches to the body.

 

3. Sew on the front legs.

 

4. Sew on the rear feet.



5. Sew the tail to the backside of the body.


6. Sew the tail fins to the tail.


7. Sew the back fin to the backside of the body and down the tail.


8. Sew the headcap onto the head.

 

9. Assemble the head fins:
For the ears, sew the webbing onto the long side of one of the fins.

For the top head fin, sew the webbing onto the short side of the fin.



10. Sew the fins to the head.



11. Cut out the eyes from black felt and cut out a small circular highlight from white felt. Cut out a small triangle from black felt for the nose. Glue or needle felt the eyes and nose to the face.




Finished! 









Thank you so much for checking out my pattern! I had a great time making this Vaporeon and I hope you did too. If you notice any discrepancies in the pattern or have any questions about the pattern, let me know in the comments below.

I'd LOVE to see your work too! 
Shout out to me on Twitter and Instagram @1UPcrochet and show me pictures of your completed projects! 

1 comment:

  1. Thank you so much for making amazing patterns!!! I can't wait to start working on these! I've been desperately trying to find great eeveelution patterns

    ReplyDelete

Powered by Blogger.